mediaamong

Hager SM101C Information The Hager SM101C is a modular, 3-phase power meter that can be used to monitor and measure a variety of electrical parameters, including current, voltage, frequency, power, and energy. It is a cost-effective and easy-to-use solution for electrical monitoring in commercial and industrial applications. Introduction The SM101C is a DIN rail-mountable device that is available in a single-module or three-module version. It has a built-in RS485 communication interface that allows it to be connected to a PC or other monitoring system. The meter also has a built-in display that shows the current values of the measured parameters.

Milesight LoRaWAN EM500 Information Introduction The Milesight LoRaWAN EM500 is a series of long-range, low-power wireless sensors that are designed to be used in a variety of IoT applications. The EM500 sensors are based on the LoRaWAN protocol, which allows them to communicate over long distances with low power consumption. This makes them ideal for applications where battery life is a critical factor, such as asset tracking, environmental monitoring, and smart agriculture.

Makita UB1103 Information The Makita UB1103 is a corded electric blower and vacuum that is designed for a variety of cleaning tasks. It is powered by a 6.8 AMP motor that provides a maximum air speed of 203 MPH and a maximum air volume of 145 CFM. The blower can be used to clear leaves, dust, and debris from walkways, driveways, patios, and other areas. It can also be used to vacuum up sawdust, dirt, and other small particles. The UB1103 features a variable speed control dial that allows you to adjust the airflow to suit your needs. There is also a lock-on button that allows you to keep the trigger depressed for continuous operation. The blower has a comfortable ergonomic handle that makes it easy to use for extended periods of time. In addition to being a blower, the UB1103 can also be used as a vacuum. Simply remove the nozzle and attach the dust bag. The blower has a built-in vacuum port that makes it easy to connect the dust bag. The dust bag has a capacity of 1.25 cubic feet, whic...

Makita HR4000C Information The Makita HR4000C is a powerful and versatile hammer drill that is ideal for a wide range of demolition and construction tasks. It features a 1050-watt motor that delivers up to 6.7 joules of impact energy, making it capable of breaking through concrete, brick, and masonry. The HR4000C also has a rotation speed of 230-450 RPM and a percussion rate of 1250-2500 bpm, making it a capable drill for both demolition and precise work. Specifications

Bosch GWS 2400 P Professional Information The Bosch GWS 2400 P Professional is a powerful and versatile angle grinder that is perfect for a variety of tasks. It features a powerful 2400-watt motor that delivers up to 24,000 RPM, making it ideal for cutting, grinding, and polishing. The GWS 2400 P Professional also features a comfortable grip and a dust extraction system that helps to keep the work area clean. Specifications

Makita DUN500WZ Information The Makita DUN500WZ is a 18V LXT Brushless Pole Hedge Trimmer that is designed for professional use. It features a powerful brushless motor that delivers up to 4400 strokes per minute, making it ideal for cutting thick hedges and branches. The trimmer also has an adjustable head that can be tilted up to 90 degrees, making it easy to reach overhead branches. Image of Makita DUN500WZ Specifications

Makita DF032DSAJ Information the information about the Makita DF032DSAJ cordless drill driver: Introduction The Makita DF032DSAJ is a 12V Max brushless drill driver that is perfect for a variety of tasks, including light drilling and driving screws. It features a compact design with a short body length of only 120mm, making it ideal for use in tight spaces. The drill driver also has a brushless motor that delivers more power and efficiency than a traditional brushed motor. This means that you can get more work done with less battery power.

Keithley 3706A Information Introduction The Keithley 3706A is a high-performance system switch and multimeter that is designed for automated testing of electronic products and components. It features a compact, 2U high enclosure that can accommodate up to six plug-in cards, providing up to 576 two-wire multiplexer channels. The 3706A also includes an optional 7.5-digit DMM, which is connected to the mainframe's analog backplane to ensure a high quality signal path. Features

Ferm RSM1017 Information the Ferm RSM1017 information in 1000 words: Introduction The Ferm RSM1017 is a high-quality fermentation chamber that is perfect for home brewers. It is easy to use and maintain, and it can be used to ferment a variety of beers, wines, and ciders. The RSM1017 features a digital temperature controller that can be programmed to maintain a specific temperature range, as well as a humidity controller that can be used to control the humidity level in the chamber. The chamber also features a built-in fan that helps to circulate the air and maintain a consistent temperature throughout the chamber.

Extech 42515 Information the information about the Extech 42515 infrared thermometer: Introduction The Extech 42515 is a versatile infrared thermometer that can measure both non-contact and contact temperatures. It has a wide temperature range of -50°C to 800°C (-58°F to 1472°F), and it can store up to 20 readings. The 42515 also features a 13:1 distance to target ratio, a laser pointer for easy targeting, and a Type K input for surface temperature measurements.

Black & Decker CD301 Information The Black & Decker CD301 is a corded jigsaw that is designed for making precise cuts in wood, plastics, and metal. It has a powerful 370-watt motor that delivers up to 4500 RPM, and a 7.25-inch blade that can cut up to 2.5 inches deep. The saw also features a bevel adjustment that allows for angled cuts up to 45 degrees. Image of Black & Decker CD301 jigsaw Here are the full specifications of the Black & Decker CD301:

DeWalt DW972 Information The DeWalt DW972 is a 12-volt cordless drill/driver that is perfect for light-duty tasks around the home or workshop. It features a brushless motor that delivers up to 1400 RPM, making it ideal for drilling holes in wood, plastic, and drywall. The drill also has a 3/8-inch keyless chuck for quick and easy bit changes. Image: Full specifications:

Worx WG324.9 Information the information about the Worx WG324.9: Intro The Worx WG324.9 is a 20V cordless pruning saw that is perfect for homeowners and DIYers who need a lightweight and easy-to-use tool for trimming branches and limbs. It features a 5-inch guide bar and a low-kickback chain that makes it safe and easy to operate. The WG324.9 is also compatible with all Worx 20V PowerShare batteries, so you can use the same battery for other tools in your collection.

Black & Decker KG915 Information Intro The Black & Decker KG915 is a 900W angle grinder that is ideal for light-duty applications. It has a compact design that makes it easy to maneuver in tight spaces, and it comes with a variety of features that make it a versatile tool. Image

Miller Matic 252 Information Introduction The Millermatic 252 is a high-performance MIG welder that is ideal for a variety of applications, including metal fabrication, maintenance and repair, farm/home, and light industrial work. It features a powerful 250 amp output and a wide range of settings, making it versatile enough to handle a variety of welding tasks. The Millermatic 252 is also equipped with a number of features that make it easy to use and maintain, such as Auto Gun Detect™, Fan-On-Demand™, and an angled dual-gear drive system. Image

Bosch GAM 270 MFL Professional Information The Bosch GAM 270 MFL Professional is a digital angle measurer and inclinometer in one. It is a versatile tool that can be used for a variety of tasks, including carpentry, construction, and surveying. Image: Specifications:

Bosch GSS 280 AE Professional Information The Bosch GSS 280 AE Professional is a powerful and versatile orbital sander that is ideal for a variety of tasks, including sanding, in-between sanding, and frame sanding. It features a powerful 280-watt motor that delivers up to 11,000 orbits per minute, making it ideal for even the toughest sanding jobs. The sander also features a decoupled sanding unit for consistent contact pressure, ensuring best results. Specifications

Husqvarna T540 XP Information The Husqvarna T540 XP is a powerful and ergonomic top-handle chainsaw designed for professional tree climbers. It features a 38cc X-Torq engine that delivers excellent performance with low emissions, as well as AutoTune technology that automatically adjusts the engine settings for optimal performance. The T540 XP also features Air Injection technology to keep the air filter clean and Low Vib vibration dampening system to reduce user fatigue. Image of Husqvarna T540 XP chainsaw Specifications

HiKOKI WH18DGL Information The HiKOKI WH18DGL is a professional-grade 18V impact driver that is designed for demanding applications. It features a powerful motor that delivers up to 145Nm of torque, making it capable of driving even the most difficult screws. The WH18DGL also has a high-speed impact mechanism that can produce up to 3,200 impacts per minute, making it ideal for driving large lag bolts and other heavy-duty fasteners. Image: Specifications:

Bosch GMF 1600 CE Professional Information the Bosch GMF 1600 CE Professional information: Intro The Bosch GMF 1600 CE Professional is a powerful and versatile router that is perfect for a variety of woodworking applications. It features a powerful 1600-watt motor that can easily handle even the toughest materials, and it comes with a variety of accessories that allow you to tackle a wide range of projects.

Vimar 20486 Information Introduction The Vimar 20486 is an orientable passive infrared motion detector that is designed for use in residential and commercial applications. It is a 2-module device that can be installed in a standard electrical box. The detector has a range of up to 12 meters and can be programmed to detect motion in a variety of ways, including single, double, or triple detection. It also has a built-in timer that can be used to control the duration of the lighting. Image

Einhell TC-AG 115 Information The Einhell TC-AG 115 is a powerful and versatile angle grinder that is perfect for a variety of tasks. It features a powerful 1150W motor that can handle even the most demanding jobs. The grinder also has a variable speed control, so you can adjust the speed to the specific task at hand. Specifications

Parkside PESG 120 A1 Information Intro The Parkside PESG 120 A1 is a portable, lightweight arc welder that is perfect for DIYers and hobbyists. It is a 120-amp welder that can be used with flux-cored wire, making it a versatile tool for a variety of welding projects. The PESG 120 A1 is also relatively easy to use, making it a good choice for those who are new to welding. Image

Makita PH02 Information The Makita PH02 is a 18V cordless hammer drill/driver that is designed for a variety of applications, including drilling in wood, metal, and masonry. It features a powerful motor that delivers up to 42Nm of torque, and two speed settings that allow you to choose the right speed for the job. The PH02 also has a built-in hammer function that makes it easy to break through concrete and masonry. Image: Full specifications:

Einhell TH-XG 75 Information The Einhell TH-XG 75 is a compact, versatile bench grinder that is perfect for a variety of small grinding, polishing, and cleaning tasks. It features a powerful 750W motor that provides plenty of power for even the most demanding jobs. The two 75mm grinding wheels can be used for a variety of tasks, such as grinding metal, sharpening tools, and polishing wood. The grinder also includes a flexible shaft attachment that can be used for more delicate tasks, such as sanding and polishing. Specifications Motor: 750W Speed: 2,800-12,000 RPM Grinding wheels: 75mm Flexible shaft attachment: Yes Dust collection: No Weight: 6.5kg Features

Milwaukee M18 FPD Information The Milwaukee M18 FPD is a cordless hammer drill/driver that is part of the M18 FUEL lineup. It features a brushless POWERSTATE motor that delivers up to 135Nm of torque and up to 2,000 RPM, making it one of the most powerful 18-volt cordless drills on the market. The M18 FPD is also very compact, measuring just 197mm in length, making it easy to use in tight spaces. Image of Milwaukee M18 FPD Specifications